Last updated on February 21st, 2021 at 05:46 am
A hammer is a wonderful, ubiquitous tool. We have used it for thousands of years for almost all kinds of wood constructions. However, times have changed. Today, the construction concepts are complex and we don’t have time either. It is imperative to have a tool like a ‘Framing Nailer’, which can resolve construction-related multifaceted issues and save our time too.
Heavy wood construction is usually based on wooden beams and lumber components.
Before using a framing nailer for heavy wood construction, like home, it is significant to have basic knowledge regarding what are the stages of building construction and what you can expect during the major phases of it.
Perceiving these details well can make the entire process straightforward. You will be able to use your framing nailer more efficiently and use it to give the construction more sustainability for the long-term.
Table of Contents
Understanding The Construction
If you don’t know how to do heavy construction, even the best framing nailer won’t facilitate you in your goals. In order to have the best and durable design, you need to know construction techniques.
In case you are a total novice and don’t know anything about it, it is better to watch some construction-related videos and see how the professional architects use the lumbers and small pieces of wood for their design.
You need to learn,
- How to choose the best woods for design versatility.
- How to construct walls, floors, roofs, and ceilings.
- How to give your design extra protection from noise, storms, and winds.
- How to prepare the construction side and pour the foundation.
- How to give room for plumbing and electrical spaces.
- How to give it the complete exterior grading.
- How to install bathroom fixtures and a few interior products.
Without pondering and comprehending these small details, it won’t be possible to create an efficient design. Since when it comes to building heavy construction, each detail matters. You aren’t just building the shelters for refugees. You are, instead, creating a home or office which will serve for years to come.
Even professional architects and builders work on the pre-production concepts before lifting their tools. They spend a good bit of time on their project and its design to make it rewarding for their clients.
For that reason, especially as a beginner, it is important to focus on the paper first and ponder all the above points before placing your finger on the trigger of a framing nailer.
Apart from this, there is another thing you must remember.
Building a heavy construction or elaborate custom home isn’t as easy as it sounds.
It is almost impossible to work on it on your own. You need to have multiple hands to support you. Therefore, make an appointment with your client and discuss the project in a tad more detail. Don’t work on the entire project on your own especially due to safety concerns and limitations.
Framing Nailer Safety Tips
Yes, it does have the ability to shave hours off work, but it is dangerous too especially if you don’t know how to use it properly.
Believe it or not, recent statistics reveal that a framing nailer causes thousands of injuries each year. Most of the builders encounter structural damage to their joints, nerves, and bones. Perhaps, that’s why professional carpenters have joint apprentice programs for the beginners in order to teach them how to use it with efficacy and avoid devastating injuries.
Firstly, and most importantly, it is important to be familiar with which trigger system you are using. Almost all framing nailers come with different trigger systems, such as bump firing trigger and full-sequential trigger.
Bump firing trigger is for experts only, and it is the most unsafe too.
It is preferred in the industrial work as the agents want their builders to work quickly. According to them, the full-sequential trigger method is undoubtedly safe but it takes a lot of time.
However, we won’t recommend bump firing trigger at all. If you are reading this post, it means you are a beginner and don’t perceive the highs and lows of building heavy construction and framing nailer operation.
That’s why you should opt for full-sequential trigger only. It will take a tad more time, but it is safe and won’t let you deal with any kind of serious injuries.
In the full-sequential trigger system, the controls are activated in a certain order. For example, it is essential to press the safety contact tip into the surface to discharge the nail.
Other than that, in order to be extra protective, you should get proper protective equipment too, such as hard hats, safety glasses, gloves, and ear plugs.
The Right Framing Nailer
If you don’t have a right framing nailer in your hands, you can face some troubles.
Knowing what’s the actual purpose of each nailer and what are your main projects is important. Every task and every project demands a tad different technique and nailer as well.
Allow us to give you an example.
People who engage in regular renovation or construction, they should always place their hands a branded framing nailer, as they aren’t only packed with different features but also allow you to work on your complex projects from different perspectives.
Furthermore, they are durable too. They can be your lifelong partner if you comprehend how to maintain them and keep them in a top-notch condition.
In addition, the overall size of the framing nailer matters too. You can’t work with big-sized framing nailers if you are planning to work on tight spaces. You need something which can be fit perfectly in smaller areas and make the impossible jobs possible.
In general, understanding these basics can facilitate you in attaching pieces of wood for heavy construction. Just ensure you have the right nails in the framing nailer that meet the building codes of your area. This will also help in buying the best framing nailer for your needs and avoiding local legal charges.
Also, it is advisable to choose a nailer which has an ideal weight for your operations.